470-0800-0063
470-0800-0064

Stille imagiQ2 X-Ray Protective Kit

The imagiQ2 protective kits are designed to be mounted on the upper part of the table top and can be used with or without side rails. Each kit consists of 2 special lamellas with cutout for the side rail clamps and of 4 straight lamellas without cutout. Available in grey and blue.

Product Inquiry
Log In for Pricing

Stille imagiQ2 X-Ray Protective Kit

The imagiQ2 protective kits are designed to be mounted on the upper part of the table top and can be used with or without side rails. The kits are attached to the table top with strips of adhesive Velcro © that are placed on the table top. Each kit consists of 2 special lamellas with cutout for the side rail clamps and of 4 straight lamellas without cutout.

Available in grey and blue. One lamella weighs around 0.9 kg (1.9 lbs).

Avoiding unnecessary radiation

Radiation exposure continues to be a major concern among the clinical staff and patient community. Based on the international Basic Standard Safety (BSS) regulations there are components of these ORs that can limit radiation exposure’s harmful risks.

Even a small dose of radiation slightly increases the risk of cancer, so, based on the principles of the optimisation of radiation protection, exposure to radiation must be kept as low as is reasonably possible.

imagiQ2 radiation shields

The STILLE imagiQ2 radiation shields protect against scattered radiation. They are fully tailored to the needs of the individual customer. Various solutions are available; the shields are either attached to the side rails or to the table top using adhesive Velcro ©.

The lead rubber (0.5 Pb) inside the strips prevents scattered radiation from getting to the lower bodies and legs of hospital staff, which are often left unprotected from radiation. The shields are easy to use. They are made of high frequency-welded, reinforced PVC plastic, a material that will withstand washing with water and disinfecting with alcohol. One kit or loop will cover only one side of the table. In order to cover both sides of the table two items of radiation shields are needed.

Product #DescriptionIncludesPhoto
470-0800-0063X-ray Protective Kit, Grey(4) x-ray protective lamellas without cutout and (2) x-ray protective lamellas with cutoutX-ray Protective Kit, Grey
470-0800-0064X-ray Protective Kit, Blue(4) x-ray protective lamellas without cutout and (2) x-ray protective lamellas with cutoutX-ray Protective Kit, Grey

Dimensions of (1) x-ray protective lamella without cutout:

  • Total length: 84 cm
  • Protective length: approx. 73 cm + 1 cm seam
  • Length of attachment area: approx. 10 cm
  • Width: approx. 16 cm (15 cm + 1 cm seam)

Dimensions of (1) x-ray protective lamella with cutout:

  • Total length: 84 cm
  • Protective length: approx. 73 cm + 1 cm seam
  • Length of attachment area: approx. 10 cm (9 cm + 1 cm seam)
  • Width of Velcro strip: approx. 5 cm
  • Width: approx. 19 cm (18 cm + 1 cm seam)

Product specs:

  • Protection level: Pb 0.5, lead vinyl
  • Cover material: Polyester fabric-coated with PVC
  • Seaming: High frequence seamed